Safety Solutions Projects

Tree Restraint Mona Vale

The preservation of this tree was possible with the installation of a non-invasive fibre rope restraint system. This special hollow braid rope is manufactured from Dyneema® SK-75 fiber and has a minimum breaking strength of 21600 Kg. The two stems will be supported should failure occur at ground level.

Tree Restraint Works

Structural Tree Restraint

This project involved the design and installation of a cable restraint system for one significant fig tree at Sydney Showground. The tree has a structural defect that required an engineering solution for its preservation. Tree restraint systems are one of our specialities.

Tree Frame Installation

Structural Tree Restraint

This interesting project for the City of Sydney revolved around tree stabilisation. THS designed and installed this tree support frame to blend with the existing park architecture. The tree species is a Dracaena draco (Dragon's Blood Tree).

Tree Restraint Wollstonecraft

Structural Tree Restraint

This tree has a localised structural weakness in the junction of two major stems. High performance spliced fibre slings are installed to reduce the risk from a major structural failure. The system has built in energy absorbers and each sling has a rating of 16,400kg.

Tree Restraint Royal Botanic Gardens Sydney

Structural Tree Restraint

This Bottle Tree (Brachychiton rupestris) had developed a problem lean and vertical split of the trunk. Our goal was to design a restraint system that supported the tree and prevented further splitting of the trunk.

Tree Restraint Lindfield

Structural Tree Restraint

Dyneema fibre tree restraints installed to protect the house from tree failure due to localised defects at a number of branch junctions. These restraints are not tensioned to be load bearing but will support the load should failure occur. The installed restraint system offers an effective tree preservation and risk management solution.

Structural Tree Restraint

This lightning struck English Oak in the Southern Highlands of NSW sustained extensive structural damage. Our tree restraint division installed this load bearing system to support the damaged stems and greatly reduces the likelihood of total tree failure. The restraint system has a rated strength of 7500 kg.

Tree Restraint Port Macquarie

Structural Tree Restraint

Structural tree defects can be a major safety risk. The tree restraints on this project are designed to support tree sections should failure occur.

The dyneema fibre restraints have an integrated shock absorbing system and are spliced to the defective sections of tree. They form a very effective tree preservation solution and greatly reduce the risks associated with tree failures. This custom designed fibre rope tree restraint system is design by Bill Goddard from our structural tree restraint division.

Safety Solutions Projects

Subscribe